STOCKO Wire to board connectors

ECO-TRONIC

ECO-TRONIC is a direct and indirect connectors with IDC termination in accordance with the RAST 2.5 standard specification for domestic appliances.

 

Description:
Closed cable entries ensure long air and creepage distances.
Trimming polarizing pegs to individual requirements produces a large number of clearly defined connector combinations.
With direct edge versions, polarizing and locking feature for PCB.
Pitch 2.5mm

 

For technical data go to STOCKO website
STOCKO Connector system ECO TRONIC
Link to STOCKO Connector Systems PDF catalogue

RFK 2

RFK 2 connector system are made up of socket connectors and pin connectors.

 

Description:
•Crimp version for indirect connections, wire range 0.12 - 0.5 mm²
•IDC version for direct and indirect connections, wire range 0.14 - 0.25 mm²
•Suitable for terminating ribbon cables and discrete wires
•Pitch 2.5mm

 

For technical data go to STOCKO website
STOCKO Connector system RFK 2
Link to STOCKO Connector Systems PDF catalogue

ECO-TRONIC CRIMP

ECO-TRONIC CRIMP direct and indirect connectors with crimp termination.

 

Description:
•Codings in accordance with the RAST 2.5 standard specification for domestic appliances
•Closed cable entries ensure long air and creepage distances
•Trimming polarizing pegs to individual requirements produces a large number of clearly defined connector combinations
•With direct edge versions, polarizing and locking feature for PCB
•Primary and secondary lock
•Pitch 2.5mm

 

For technical data go to STOCKO website
STOCKO Connector system ECO TRONIC CRIMP
Link to STOCKO Connector Systems PDF catalogue
Video

RFK 1

RFK 2 connector system is a IDC version for direct and indirect connections.

 

Description:
•Wire range 0.14 - 0.25 mm²
•Suitable for terminating ribbon cables and discrete wires also available with polarizing pegs.
•Pitch 2.54mm.

 

For technical data go to STOCKO website
STOCKO Connector system RFK 1
Link to STOCKO Connector Systems PDF catalogue

HLK 3500

HLK 3500 are suitable for the connection to HVAC periphery devices, e. g. stepping/servo motors or linear actuators.

 

Description:
•Pluggable connector with external locking feature
•Crimped wires are from the rear insertable
•Cable exit 180°
•Remarks with or without seal
•With seal IP 44
•Clear positioning
•Pitch 3.5mm

 

For technical data go to STOCKO website
STOCKO Connector system HLK 3500
Link to STOCKO Connector Systems PDF catalogue

S-FIT

S-FIT is a universal connector system for internal equipment wiring.

 

Description:
•Applicable as flying lead coupling, for panel mounting or for printed circuit board contacting
•Available in a range of versions and materials
•Crimp contacts are touch-protected into the housing located
•Cable exit 180°
•Pitch 4.2mm

 

For technical data go to STOCKO website
STOCKO Connector system S-FIT 4.2
Link to STOCKO Connector Systems PDF catalogue

ECO-DOMO FT

The ECO-DOMO FT is an indirect IDC connector in accordance with the RAST 5 standard specification for domestic appliances, suitable for up to 10 A current load.

 

Description:
•Complex cable assemblies with fully automated terminating capability
•Meeting RoHS requirements
•Highly economical
•Cable exit at 90°
•Pitch 5mm

 

For technical data go to STOCKO website
STOCKO Connector system ECO-DOMO FT
Link to STOCKO Connector Systems PDF catalogue

ECO-DOMO NF

ECO-DOMO NF is a direct and indirect connector with IDC termination in accordance with the RAST 5 standard specifications for domestic appliances, with locking features inside or outside

 

Description:

•Direct connector with central polarizing and polarizing pegs at sides, locking features for PCB
•Cable exit 90° and 180° according to RAST 5
•Pitch 5mm

 

For technical data go to STOCKO website

STOCKO Connector system ECO-DOMO NF
Link to STOCKO Connector Systems PDF catalogue

ECO-TRONIC PRO

ECO-TRONIC PRO is a direct and indirect connector with IDC termination in accordance to the RAST 2.5 standard specification for domestic appliances.

 

Description:
•Closed cable entries ensure long air and creepage distances
•Trimming polarizing pegs to individual requirements produces a large number of clearly defined connector combinations
•With direct edge versions, polarizing and locking feature for PCB
•Pitch 5mm

 

For technical data go to STOCKO website
STOCKO Connector system ECO-DOMO PRO
Link to STOCKO Connector Systems PDF catalogue

ECO-DOMO TI

ECO-DOMO TI tab connector for IDC termination as flying lead coupling or for panel mounting application.

 

Description:
•Versions with / without locking features
•Cable exits 90° , 180° (optional 270°)
•Single and / or twin terminations depending on wire size
•Codings in accordance with the RAST 5 standard specifications
•Label optional
•Pitch 5mm

 

For technical data go to STOCKO website
STOCKO Connector system ECO-DOMO TI
Link to STOCKO Connector Systems PDF catalogue

TL 1

TL1 for direct and indirect connectors with IDC termination, the leaf spring contacts ensure trouble-free connections even in large multi-way systems.

 

Description:
•Suitable for termination with hand tools or on semi-automated machines.

•Pitch 5mm

 

For technical data go to STOCKO website
STOCKO Connector system TL1
Link to STOCKO Connector Systems PDF catalogue

Can We Help? We offer expert advice and information on all our products. Contact us on: +44 (0)1327 876769 or enquire online