The DD and DS right angle board-in insulation displacement connectors measure 3.5mm in mounting height and 4.3mm in width. Since the right angle connectors are connected to wires running parallel to the printed circuit board, electronic equipment can have a lower profile.
The contact solder tails are elastic and have two locking positions, both of which ensure stable connection once inserted into a printed circuit board. The two locking positions of the DD connector are asymmetrical and best suited for use with 0.8mm and 1.0mm thick printed circuit boards. The two locking positions of the DS connector are also asymmetrical for use with 1.2mm and 1.6mm thick PC boards.
Thanks to the strain relief construction, the wire insulation is held by the housing when the wire is terminated. Furthermore, sufficient clearance is provided between the insulation displacement section and the strain relief section to ensure decoupling from vibration and tension. The insulation displacement section to which the wire is connected is composed of two highly reliable tin-plated slots (twin U-slots).
These connectors are suited for the high-density wiring of electronic products.
Standards:
Connection Type: Printed Circuit Board Connectors
Product Type: Wire to Board Insulation Displacement Connectors
Pitch: 2.00mm
Current rating: 0.7A AC,DC
Voltage rating: 100V AC,DC
Temperature range: -25 to +85°C
Available number of circuits: 2 to 15
PCB Mount Style: Through-hole Technology (THT)
UL Recognized E60389
CSA Certified LR20812
RoHS Compliant
Technical data
PDF: DD/DS CONNECTOR
Enquire about this product
