The KR connector features a mounting height as low as 6.9mm and a thickness as thin as 4.8mm (for top entry type)
The contact springs are folded to increase their effective strength. This provides a safety margin that allows the contacts to endure the distortion of miss-insertion without being permanently distorted.
Insulation displacement section connected to the wire consists of two tin-plated slots (twin U-slot) for superb reliability. The strain relief feature prevents stress due to vibration, impact or bending from effecting the insulation displacement connection. This is accomplished by holding the outside of the wire with the insulation gripping device on the housing. To ensure circuit integrity against vibration and undue tension, ample clearance is provided between the insulation displacement connection and the strain relief.
The same shrouded header can be used for either PH crimp style connector or KR insulation displacement connector. This allows both types of connector to be used interchangeably without replacing the header.
The KR connector is also available in a surface mount configuration. Its housing is made of heat resistant resin so that is not adversely affected during reflow soldering. Because of its tiny size and ability to be surface mounted, this connector meets the demand for high-density mounting of components inside electronic products.
Standards:
Connection Type: Printed Circuit Board Connectors
Product Type: Wire to Board Insulation Displacement Connectors
Pitch: 2.00mm
Current rating: 1.0A AC,DC
Voltage rating: 100V AC,DC
Temperature range: -25 to +85°C
Available number of circuits: 2 to 16
PCB Mount Style: Through-hole Technology (THT)
UL Recognized E60389
CSA Certified LR20812
TUV Certified R75088
RoHS Compliant
Technical data
PDF: KR CONNECTOR
Enquire about this product
